Filter
Top Products
3
XDMA460 INSTALLATION
FUSE
When replacing the
fuse, make sure new
fuse is the correct type
and amperage. Using
an incorrect fuse could
damage the radio.
The XDMA460 uses
one 10 amp ATM fuse
located beside the wiring
connector.
BLUE
BLACK
RED
YELLOW
Remote Turn-On
Connect to amplifier or power
antenna. Insulate wire if not used.
Ground
Connect to the vehicle
chassis ground.
Accessory
Connect to an existing ignition
circuit or switched 12 volt source.
Memory
Connect to the battery
circuit or constant 12 volt source.
Right Front
Gray/Black (-)
Gray (+)
Left Front
White/Black (-)
White (+)
Left Rear
Green/Black (-)
Green (+)
Right Rear
Violet/Black (-)
Violet (+)
Antenna
Connector
SUB WOOFER Output
AUXREARFRONT
L-CH
R-CH
Rear Output
RCA Preamp Connections
Front Output
Rear Auxiliary Input
Wiring Diagram