Filter
Top Products
18 19
XDVD1002CM OPERATION
Troubleshooting
Copyright Notes
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technol
-
ogy must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless other
-
wise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
DivX, DivX Certified, and associated logos are trademarks of DivXNetworks, Inc. and are used under license.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
Confidential unpublished works. ©1992-1997 Dolby Laboratories, Inc. All rights reserved.
1. Verify +12VDC power at 20pin wire harness
.
2. Verify ground connection by conducting a continuity test from known ground to
ground wire at 20pin wire harness.
1. Verify that the correct A/V source is selected (DVD, AUX1, AUX2).
2. Verify connections at both ends of any external source component harness used.
1. A small amount of picture distortion may appear because of a poor quality
video/sound transfer to disc.
1. Physical defect in media. Check media for scratches.
1. Disc is loaded backwards. Place the disc in the unit with the mirrored side
facing forward.
2. Make sure the disc is free from scratches and fingerprints.
3. Press the SETUP button to turn off the menu screen.
4. Cancel the parental lock function or change the parental lock level.
(The default password is 0000)
5. Use discs labeled “Region 1” or “All” only.
1. Check for obstructions in front of the IR sensors on the main unit.
2. Replace the battery.
Unit has no power at main unit
Unit has power but no video
Picture has occasional distortion
Brightness unstable
The DVD does not start playback
Remote control not working