Filter
Top Products
7
Connecting the parking brake lead (Yellow/Blue - )
The Yellow/Blue lead MUST be connected for the
in-dash monitor to operate properly. The DVD
video display of the in-dash unit will not operate
while the vehicle is moving. This is a safety
feature to prevent driver distraction. In-dash DVD
video functions will only operate when vehicle is
in Park and the parking brake is engaged. It is
illegal in most states for the driver to view video
while the vehicle is in motion. This wire must be
connected in accordance with all local, state and
federal laws in your area.
Connecting the reverse lamp lead (White/Brown + )
The White/Brown lead connects to the vehicle
reverse lamp circuit (optional). When reverse
gear is selected, the unit will automatically select
rear view mode and display the image on screen.
This will allow the driver to view images from
a back-up camera (optional) connected to the
dedicated rear camera input.
Note: The Rear View camera must be set to ON to
view images when reverse gear is selected. See
page 20 for details.
Speaker Connections
Do not connect any speaker leads to chassis
ground or each other as severe damage will
occur. Use 4 ohm speakers with a 60 watt
(minimum) power rating only.
Fuses
When replacing a fuse, make sure new fuse is
the correct type and amperage. Using an incorrect
fuse could damage the unit. To prevent accidental
shorts, insulate any unused wires.
XDVD8265 INSTALLATION
Wiring Diagram - Power/Speakers