Filter
Top Products
XDVDN8290 OPERATION
77
Bluetooth
®
- Setup Menu (Optional)
Pairing
Step 1
Step 2
Notes
Auto Answer
Connect
Before you can use a mobile device with this head unit, it must be
authenticated. This is also referred to as "pairing" a device.
Note: Please make sure that Bluetooth is activated on your mobile device before
you begin the pairing process. Refer to the owner's manual of your mobile device
for more details.
Access Bluetooth setup menu and press Yes to begin the pairing process. The
head unit will display "Wait Pairing.." and will search for any nearby Bluetooth
device. If you have more than one Bluetooth device, please make sure only the
device you want to connect to is powered on. Refer to the owner's manual of your
mobile device for more details on searching for Bluetooth devices.
When prompted by your mobile device, enter 1234 for the PIN or pass code.
The device name of the head unit will show up as "MM-BT G1". After the pairing
process has completed, the Bluetooth icon will turn solid blue.
It is possible to search for previously paired Bluetooth devices from this head
unit. It may be possible to search for this head unit from other Bluetooth enabled
devices.
To search for this head unit from another device (when already connected),
press Yes under the Pairing function. The currently connected device will be
disconnected and pairing to the new device will be possible. It may also be
possible to disconnect this head unit from another mobile device.
This unit can remember the last 4 paired mobile devices. It is only possible to
connect to one Bluetooth mobile device at a time.
When pairing to more than 4 mobile devices, the head unit will delete the phone
that was least used to allow for the new pairing (connection). The mobile device
that is initially connected will always be remembered (default phone).
The MUTE function can not be used during Bluetooth operation. If MUTE is active
when a call is received, the audio will automatically be transferred to the mobile
device.
The head unit will automatically answer incoming calls when the Auto Answer
feature is set to On. If the Auto Answer feature is set to Off, the Talk button must
be pressed to answer an incoming call.
The head unit will automatically connect to a previously connected mobile device
when the Connect feature is set to Auto. If the Connect feature is set to Manual,
the head unit will not automatically connect to any mobile device. Set the Connect
feature to Manual when you do not want to connect to any Bluetooth mobile
device.