Filter
Top Products
Things You should Know
If One of These Messages Appears
If any of the following messages is displayed on the sub display, check the equipment while referring to
the Cause and Corrective action columns.
Messages Cause Corrective action
CD/MP3
READING ... MAIN UNIT IS READING DISC Wait until the message
disappears before operating.
INFO 3 DISCS ARE DIRTY OR
DAMAGED
The loaded disc is dirty or
upside down. Check if the
orientation is correct and if it is
clean.
INFO 5 CD PLAYER FAILS
MECHANICALLY
The CD player is inoperative for
some reason.
INFO 6 WHEN THE CD PLAYER’S
INTERNAL TEMPERATURE IS
HIGH (TO PROTECT PICKUP
UNIT)
・The temperature in the CD
player is too high for operation.
Wait till it cools down.
・
Resume playing after the "High
temperature sensed and CD
stopped" display disappears. If
the CD still cannot play, have
your dealer repair it.
INFO 7 AN INTERNAL POWER
SUPPLY FAILURE HAS
OCCURRED
・Turn the ACC off and back on
to resume the operation.
・If this condition persists,
please contact your dealer.
PROTECT ALL THE FILES IN CD ARE
LICENSE PROTECTED
Check the file.
USB
READING ... USB MEMORY IS SENDING
DATA
Wait until the message
disappears before operating.
USB ERR PROBLEM WITH DATA
TRANSMISSION
Confirm connection with a USB
memory or USB memory
standards.
NO DATA THERE ARE NO MUSIC FILES
STORED IN USB MEMORY
Check files in USB MEMORY.
iPod
READING ... iPod IS SENDING DATA Wait until the message
disappears before operating.
NO DATA THERE ARE NO MUSIC FILES
STORED IN iPod
Check the files in the iPod.
ERROR1 iPod STOPPED SENDING
DATA FOR SOME REASON
Check the connection with the
iPod.