Filter
Top Products
Before Asking for Repairs
Slight differences in operation can sometimes be mistaken for malfunctions, so check the following
table before asking for any repairs.
If the following fail to solve the problem, contact the place of purchase.
ERROR2 iPod SOFTWARE NOT
SUPPORTED
・Make sure that the software
for your iPod is the latest
version.
・Make sure that your iPod
model name is listed on the iPC-
107's manual (iPC-107 : Sold
separately).
CAUTION
If a problem occurs, for instance when the main unit does not respond to any button operation, or
the display does not work correctly, press the [Reset] button using a paper clip or anything similar.
Pressing the [Reset] button will delete all the entries from memory. The settings will return to those
made at the factory prior to shipment.
Problem Possible reason Corrective action
The screen is dark for a brief
period when the power is turned
on at low temperatures.
This is a characteristic of LCDs. This is not a malfunction. Wait
for a brief period.
The display is distorted for a
short while after the power is
turned on.
This is a characteristic of LCD
backlighting.
This is not a malfunction. The
display will stabilize after a brief
period.
No sound comes out.
The volume is poorly adjusted or
MUTE is on.
Turn the [VOL] rotary knob and
check the volume. Or cancel
MUTE.
The music is muted when the
PND is attached to the main unit
and when:
- voice guidance is given
- talking in hands-free mode*
This is not a malfunction. The
music can be heard again when
the voice guidance finishes or
the hands-free mode is turned
off.
Sound comes out of only one
side (left or right, front or back).
A speaker wire is disconnected. Check the connections of the
speaker wires.
Volume is poorly adjusted. Check the balance and fader
adjustments.
The sound quality does not
change even after making
adjustments.
The adjusted audio quality is not
included in the radio broadcast
or disc.
Check by changing the radio
station or disc.
A CD will not go into the deck. The power is not turned on. Turn the vehicle ignition switch
to [ACC] or [ON].
A disc is already inserted and
you are trying to insert a second
disc.
Eject the previously inserted CD
and insert the preferred CD.
Messages Cause Corrective action