Eclipse - Fujitsu Ten CD5000 Car Stereo System User Manual


 
-
7
-
Front line-out terminals
Connect to the RCA connector of an external amplifier.
Rear line-out terminals
Connect to the RCA connector of an external amplifier.
Line-out terminals (Non fader)
This is used for non fader output. It can be used as a sub-woofer terminal if a separate amplifier with
a low bass filter is connected.
AUX in terminals
Connect if using together with portable audio equipment that is sold separately.
* If the output from the connected equipment is via a mini plug, it will need to be converted to RCA.
(CD5000 only)
E-LAN terminal (13P)
Connect to the E-LAN terminal of the CD changer, etc.
(CD5000 only)
LAN terminal
(8P)
Connect to the LAN terminal of GPS unit.
F
E
Vehicle component adapter wires
Vehicle harness
From main unit
-
Example of using vehicle adapter wires
-
-
Vehicle connections
-
You will need to purchase the necessary vehicle component adapter wire for the vehicle so that the
power supplies can be utilized. (Contact the dealer for further details.)
Be sure to wrap the connection wires with electrical tape or another insulation method to insulate them.
Tip
Power supplies
for combined
equipment
Español Français Italiano
Nederlands
SvenskaEnglish
A
B
C
D
Main unit connections