Filter
Top Products
Upload the analyzed frequency characteristic data to the E-iSERV website, and make
adjustment on the website. For details of the operation, see the HELP page on the
website.
Load the adjusted data from the USB memory to the unit.
For details of the operation, see 'Importing Sound Data (Sound Data)' in the Owner's
Manual.
ATTENTION
<When using a USB memory drive>
•
Data downloaded from the E-iSERV website should be saved to folders created in the USB drive
as shown below (NOTE: in order for the system to properly recognize and load audio customization
data, the user must create and name their folders as shown in the diagram below).
ECLIPSE
DATA
File extension
Two digit number
208 X 00 .eis
Adjustment mode
Adjustment pattern
Must be created by user
Automatically generated filename
*
(a: 3 Way d: 4 Speaker)
• Files retrieved from the E-iSERV website are automatically generated fi lenames upon
download.
<When using a CD-R>
• The main unit can only import fi les located in the root directory of the CD-R.
File extension
Two digit number
208
X 00 .eis
Adjustment mode
(a: 3 Way d: 4 speaker)
Adjustment pattern
Automatically generated filename
*
• Disc formats that may be used are as follows:
• CD-ROM (MODE 1)
• CD-ROM (MODE2_FORM 1)
* CD-ROMs written in MODE2_FORM2 cannot be read.
• The loading process may take longer if the CD-R contains unrelated data in addition to
the audio customization fi les to be imported.
22
33