Filter
Top Products
79
How to operate the receiver with an optional DSP/EQ unit or Digital Sound Processor connected
3. Turn the [
AUDIO CONTROL
] button.
This button adjusts the reverberation level and duration.
Turn to the right : Increases the value.
Turn to the left : Decreases the value.
4. Hold down a button, [1] to [6], for more than two
seconds to preset a value.
The preset value is overwritten by the value set using
the above steps.
5. Push the [FUNC] button.
The adjustment mode will be canceled and the
selected room size will now take effect.
ReverberationInitial echo delay
Long
Time
Initial echo]
Reverberation duration
Direct (original sound)
Level
High
[AUDIO CONTROL]
button
Buttons [1] to [6]
[FUNC] button