Filter
Top Products
85
Buttons [1] to [3]
[FUNC] button
Button [6]
[AUDIO CONTROL]
button
How to operate the receiver with an optional DSP/EQ unit or Digital Sound Processor connected
How to operate the Digital Sound
Processor
In case the 39011 Digital Sound Unit is connected to the CD
Tuner, a CD recorded by DTS cannot be decoded.
Music can be enjoyed more comfortably by modifying the
speaker settings.
Setting the speaker size
The size of each speaker is switched.
1. Press the [FUNC] button.
2. Press and hold button [3] for more than two
seconds to shift to the setting mode.
3. Press button [1] to shift to the speaker setting
mode.
4. Switch the settings by pressing the button
corresponding to each speaker.
Button [1]: Front speaker
Large/small
Button [2]: Rear speaker
Large/small/none
Button [3]: Center speaker
Large/small/none
Button [4]: Woofer speaker
Yes/no
5. Press the [FUNC] button to return to the setting
mode.