Filter
Top Products
Installing the Equipment
Warning!
The Technical Earth is not a Protective earth for electric shock protection.
This unit must be correctly earthed through the molded plug supplied. If the local
mains supply does not have an earth conductor do not connect the unit. Contact
Customer Services for advice.
Before connecting the unit to the supply, check the supply requirements in Annex B
of the Reference Guide.
2.4 Rear Panel Connectors
Always use the specified cables supplied for signal integrity and compliance with
EMC requirements (see the Reference Guide).
Note: Rear panel connectors may differ, depending on the options selected.
ETHERNET 1-2
TECHNICAL
EARTH
ASI OUT 1-2
CVBS
A
LARMASI INPUT
AC POWE
R
RF IN
AUDIO OUT (1)
1-2
IP OUT 1-2
Figure 1 Rear Panel Connectors
Table 4 Types of Connector
Type of Connector Description
RF IN
F-type connector for DVB or DVB-S2 modulated input
feed.
IP OUT 1 & 2
8-way RJ-45 connectors for 1000BaseT IP output feed &
de-encapsulated IP data
AUDIO OUT 1 & 2
9-way male D-type connectors for analogue and
balanced digital audio output.
ASI OUT 1 & 2
75 Ω BNC connector for Transport Stream output feeds.
CVBS
75 Ω BNC connector for SD composite video output.
ASI INPUT
75 Ω BNC connector for ASI input feed.
ETHERNET 1 & 2
8-way RJ-45 connectors for 10/100BaseT Ethernet
control and monitoring.
EN/LZT 790 0008/2 R1A 2011-03-30
8 (36)