Filter
Top Products
B-3
MPA 401-70V • Mounting
Rack mounting procedure
The unit can be mounted on any of these optional rack systems:
RSU 126 — 6" deep 1U universal rack shelf kit (part # 60-190-10)
RSB 126 — 6" deep 1U basic rack shelf (part # 60-604-11)
RSU 129 — 9.5" deep 1U universal rack shelf kit (part # 60-190-01)
RSB 129 — 9.5" deep 1U basic rack shelf (part # 60-604-02)
To mount the scaler on a rack shelf, follow the instructions provided with the shelf
accessories.
C
Use only the two holes indicated in the diagram below for mounting the
MPA 401. The other four holes anchor stand-offs for the internal circuit
boards; using them may damage the amplifier and will not provide secure
mounting for the unit.
#4-40 Thread Thru
Rack Mounting
#4-40 Thread Thru
Rack Mounting
Under-desk Mounting
Mount the unit under a desk or podium, using the optional Extron MBU 125
under-desk mounting kit (part # 70-077-01) by following the instructions provided
with the MBU 125 kit.
Through-desk Mounting
Mount the unit through a desk or podium using the optional Extron MBD 129
through desk mounting kit (part # 70-077-02) by following the instructions
provided with the MBD 129 kit.
Pole Mounting
The amplifier can be mounted above a projector using either of these optional
Extron Pole Mounting Kits:
• PMK 100 Pole mount kit (part # 70-217-01)
• PMK 350 Pole mount kit (part # 70-563-03)
Follow the instructions provided with each kit.