60
My iPod/iPhone will not
connect to the Head
unit while in the dock.
IfyourHeadunitdisplays“NotConnected”whileusingiPodas
input source:
• Checkthatyouareusingthecorrectsleevecombination.If
you have the incorrect sleeve combination this could prevent
the iPod connector from mating correctly. It could also dam-
age the connector in the dock or your iPod/iPhone itself.
If you are uncertain which iPod model you have, go to
http://www.apple.com/support/ to get the correct model
information for your iPod and sleeve.
If you are still unable to connect once you know for certain
you have the correct iPod/iPhone–sleeve combination:
• Ensurethatyouhavethelatestversionofoperatingsoft-
ware installed in your iPod/iPhone and the latest iTunes
version. To do this, connect your iPod/iPhone to iTunes and
it will check and, if necessary, prompt you to download the
latest version.
If you are still unable to connect once you have confirmed
that you have the latest software or you have updated your
iPod/iPhone:
• ResettheiPod/iPhone(seetheusermanualforyourApple
product)andalsoresettheHeadunit(seeFUSIONuser
manual).
If you are still unable to connect:
• ContactyourFUSIONdealerorcontactFUSIONviathe
tech email on the FUSION website.
Problem Solution
WirelessRemoteAppforiPadandiPhone
My FUSION-
Link Wireless
application
displays “No
stereo available”
The first thing to check is that you are connected to the correct
wireless network for the 700 series.Once you have confirmed this
close the App on the device and restart it (consult the manufacturers
websiteforinstructionsonrestarting).Ifthisfailscheckthatyouhave
a valid IP address on the 700 series and follow the instructions in the
below tech support item
My FUSION-Link
Wireless remote
aplication wil
not connect to
my 700 Series
stereo
The first thing to check is that the 700 series is displaying a valid IP
address on the about screen. Select the settings menu then about to
confirm. If the display is “ IPNone “ the router is either not a compatible
DHCPproductornotconguredcorrectly.IftheIPaddressstarts
with the prefix 169. it is not valid, this is a default address when the
routerisnotsendingaDHCPgeneratedIPaddressoriscongured
incorrectly.PleasereviewtheRouter’sinstructionmanualorcontact
the manufacturers website for technical help.