Gemini RS-415USB Car Speaker User Manual


 
9
8
10
type de situation au risque d’endommager l’amplicateur de l’enceinte. Ceci peut aussi en-
dommager le FUSIBLE PRINCIPALE (MAIN POWER FUSE).
POWER und CLIP LED. Die POWER LED leuchtet, sobald der Lautsprecher in Betrieb genom-
men wurde. Die CLIP LED leuchtet immer dann, wenn das System übersteuert. Betreiben Sie
die Lautsprecher der RS SERIE nicht im Bereich von Übersteuerungen, da dies zu Beschä-
digungen des internen Verstärkers oder dem Durchbrennen der HAUPTSICHERUNG führen
kann.
The MASTER VOLUME level governs the overall volume level of your RS SERIES loudspeaker.
El nivel de MASTER VOLUME controla el volumen general de sus RS SERIES.
Le potentiomètre MASTER VOLUME permet de régler le niveau du volume général de votre
enceinte RS SERIES.
Mit dem MASTER VOLUME Regler stellen Sie die Gesamtlautstärke des Lautsprechers ein.
The MIC LEVEL rotary governs the LEVEL of the MICROPHONE INPUT.
El control rotativo MIC NIVEL controla el NIVEL de la entrada de MICROFONO.
Le potentiomètre MIC LEVEL permet le réglage du le volume de l’ENTREE MICROPHONE.
Der MIC LEVEL Regler ist für den die LAUTSTÄRKE des MIKROFON EINGANGS zuständig.
The LINE LEVEL rotary adjust the volume of the INPUT Channels.
El ajuste rotativo de LINEA controla el volumen de la ENTRADA.
Le potentiomètre LINE LEVEL permet le réglage du volume de l’ENTREE LIGNE.
Mit dem LINE LEVEL Regler wird die Lautstärke der Eingänge INPUT geregelt.
EQ (BASS and TREBLE) ) The (TREBLE) rotary will adjust the high end frequencies and the (BASS)
rotary will adjust the low end frequencies of the overall output of the RS SERIES loudspeaker.
In the point 10 it should be: EQ (GRAVES y AGUDOS). El control rotativo (TREBLE/AGUDOS)
ajusta el nivel de las frecuencias altas y el control rotativo (BASS/GRAVES) ajusta el nivel de
las frecuencias bajas de la salida total de sus cajas RS SERIES.
CORRECTIONSPARAMETRIQUES (GRAVE/AIGU). Sur les modèles, le potentiomètre TREBLE
(AIGU) permet d’augmenter les aigus & le potentiomètre GRAVE (BASS) permet d’augmenter
les graves de la sortie principale des modèles RS SERIES.
EQ (BASS und TREBLE) Der (TREBLE) Regler steuert den Anteil der hohen Frequenzen,
während der (BASS) Regler die tiefen Frequenzen regelt.
HAUPTEINGANG An die XLR- 6,35mm- und Cinch-Anschlüsse schließen Sie Ihre Sig-
nalquelle an. Die RS-Serie verfügt über separate XLR Eingänge für MIKROFON und LINE, die
sich individuell regeln lassen und haben neben individuellen symmetrischen XLR Eingängen
für MIKROFON und LINE zusätzlich einen unsymmetrischen 6,35mm Klinkeneingang für Mi-
krofon und einen Cinch Eingang für Line Signale.
AUX INPUT. The RS Series has BALANCED (XLR) and UNBALANCED (RCA) that allow you
to connect an auxiliary input source, if both MAIN INPUT and AUX INPUT are connected
simultaneously both inputs will be heard.
ENTRADA AUX. Estos conectores BALANCEADOS (XLR) y NO BALANCEADOS (RCA) per-
miten conectar una entrada auxiliar, si ambas ENTRADA PRINCIPAL y ENTRADA AUX están
conectadas a la vez, se oirán ambas por el equipo.
ENTREE AUXILIAIRE. Les modèles possèdent une entrée LIGNE (LINE IN) doublée XLR &
RCA.Le volume est géré par le potentiomètre rotatif LINE LEVEL.
AUX EINGANG An diese unsymmetrischen 6,35mm Klinken- und Cinch Anschlüsse) können
Sie eine weitere Signalquelle anschließen. Sind sowohl der Haupteingang als auch der AUX
EINGANG angeschlossen, können Sie beide Signale gleichzeitig hören.
LINE OUTPUT is directly connected to the input and or inputs of the RS SERIES loud-
speaker and provides a one-to-one copy of the input signal, for example, to loop the in-
put through to the input of another device (e.g. a second RS SERIES loudspeaker).
SALIDA DE LINEA está conectada directamente a la entrada o entradas de la RS SE-
RIES y nos ofrece una copia exacta de la señal de entrada, por ejemplo, para linkear la
señal de entrada hacia otra unidad (por ejemplo a una segunda caja acústica RS SERIES).
SORTIE LIGNE. Cette sortie permet de chaîner les enceintes RS SERIES entre elles an
de diffuser le même signal audio. Exemple: vous sortez le signal audio de la première
enceinte par la sortie LINE OUT, puis vous rentrez sur la seconde par l’entrée LINE/MIC.
LINE AUSGANG. Dieser Ausgang liefert eine Kopie des Eingangssignals, um es beispiels-
weise an einen weiteren aktiven Lautsprecher aus der RS Serie zu leiten.
POWER and CLIP LED. The POWER LED will illuminate when the system is in operation.
The CLIP LED will illuminate when the system is overloading, running your RS SERIES loud-
speaker at CLIP levels is not recommended and will cause the internal amplier to fail and or
the MAIN POWER FUSE to blow.
LED DE ALIMENTACION Y DE CLIP. El LED DE ALIMENTACION se enciende cuando el siste-
ma está operativo. El LED DE CLIP se enciende cuando el sistema está en sobrecarga, llevar
las cajas RS SERIES a nivel de CLIP no está recomendado ya que podría dañar el amplica-
dor interno o quemar el FUSIBLE DE ALIMENTACION.
LEDs POWER & CLIP. La LED POWER s’allume à la mise sous tension de l’appareil. La
LED CLIP s’allume en cas de surcharge et de distorsion. Il est recommandé d’éviter ce
7
FUNCTIONS
FUNCIONES • FONCTIONS • EINLEITUNG
6
5
4
5