Genesis Advanced Technologies 2.2 Car Speaker User Manual


 
20
absolute fidelity
important. Generally speaking, the Genesis loudspeakers
prefer a live front wall.
By these terms we mean the amount of reflection of sound.
A typical wall of glass or, brick, cement or drywall material is
a reflective surface. A heavily curtained or sound proofed
wall would be considered a "dead wall" or a non-reflective
wall. A normal thin curtain across a window causes only a
small amount of absorption.
2. Sidewalls. Because the speaker is a dipole it is less
sensitive to the sidewalls. However, as a rule of thumb, it is
a good idea to keep the speaker as far away from the
sidewalls as is practical. With this in mind, it may be helpful to
add some damping material or diffuser panels to the point of
first reflection. This is a point on the sidewalls between the
listener and the loudspeaker. It is where the sound from the
loudspeaker first hits the sidewall, then bounces to the
listener. This reflection is undesirable because it is slightly
delayed from the original sound. This point on the sidewall
can be easily determined with the help of a second person
and a mirror.
Sitting in your listening position have an assistant hold a
mirror up on the sidewall. Move the mirror until you can see
the tweeter. This is the point of first reflection. A diffuser (see
your dealer), an absorptive material or even a CD rack can
help break up this point of first reflection.
3. Rear wall. In many cases it will be unnecessary to do
anything with the wall behind your listening position.
However, you may want to experiment with diffusers or
absorbers behind you for best sound. Absorption behind the
listener is usually beneficial.
Mastering the Refinements of the system
Fine tuning an audio system is an art that will take time and
patience. It can be one of the more rewarding learning experiences
you will have in the pursuit of music and its enjoyment.
One of the best pieces of advice we can offer is that you take
advantage of the ear's ability to identify similarities in sound. This
ability is useful in fine tuning your system because if every recording