Filter
Top Products
13
Listen to a CD (more details on page 17):
Step 1. Insert the CD into the slot – make sure the printed side of the CD is facing
the front of the Cabinet (see temporary label next to CD slot for loading instructions).
The LED Display under the grille should display “CD” and the CD should start playing
automatically. If the display does not light up then check that the AC power cord is correctly
inserted in to functioning AC outlet. If you still cannot hear any sound, check that the volume
is turned up by adjusting the “+” volume key.
Step 2. You can navigate the CD player by using the Stop, Play/Pause,
Skip/Fast Forward and Skip/Fast Reverse keys on your remote control.
Step 3. To remove the CD, either press the Eject key on the remote control or
the Eject key next to the Universal Dock under the lid on top of the Cabinet.
Listen to the FM radio (more details on page 18):
Step 1. Connect the External antenna to the External FM antenna connector on the
Bottom Panel under the Geneva Sound System.
Step 2. Press the FM button on the remote control and the LED Display under the grille
should display an FM frequency, e.g. “103.2”. If the display does not light up, check that
the AC power cord is correctly inserted into a functioning AC outlet. If you still cannot hear
any sound, check that the volume is turned up by adjusting the “+” volume key.
Step 3. Select an FM station with the << and >> keys.
CD title