Filter
Top Products
19
How to select a FM radio station?
1. Press ‘FM’ on the remote control.
2. Use the << or >> keys to select a station: one click increases or decreases the
frequency.
3. The number on the LED display under the Grille indicates the current frequency in MHz
(e.g. “88.7“ on display means 88.7 MHz).
4. To scan through frequencies, hold down the << or the >> key for a few seconds
and the FM radio searches for the next station automatically. When a station has
been found, the automatic search stops. To keep scanning, repeat the action.
How to store your favorite FM radio station in a preset?
1. Select your favorite radio station using the << or >> keys on the remote control.
2. You have six presets (a preset memorizes the frequency of the station)
available – these are the following six keys on your remote control:
FM Radio Presets
ERP
TES
3. Select one of the 6 preset keys on the remote control, and hold it down until ‘store’
appears on the LED display in the Grille of the Geneva Sound System. The station has
now been stored and can be retrieved using the selected preset key.
How to play a FM radio station that is stored in the presets?
1. Press the FM key on the remote control.
2. Simply press one of the six preset keys once and the stored FM station will be
received.
How to erase or overwrite a preset?
Stored presets do not need to be erased - just use the steps set out in 3.13 above to
overwrite an existing preset and to store a new radio station in a preset.