Filter
Top Products
ENGLISH
31
OPERATING INSTRUCTIONS (continued)
System Menu
TV/Video Mode
Selected characters W X Setup hint
Signal Format (off the function) - Press the ENTER button to show the information of the current input signal.
Advanced Press ENTER button to select the following functions
3D Comb
On Off
Use only for the NTSC system. Improve the quality as good as Super-video
input. (Available for TV/Component signals.)
Gamma
2.2 2.6 2.8
Adjust to preference. (Available for TV signal.)
AFC
On Off
Auto Frequency Control. Auto tuning the channel frequency to the correct
location.
Panel Lock
On Off
This is for locking out the control panel function.
Adjust to prevent children from touching.
Mode
Off Mode 1 Mode 2
Adjust to preference.
The moves the picture around the screen to reduce the panel image retention.
This is where stationary objects, such as screen logos, leave a slight image
visible after they should have disappeared.
Move Screen
Time 5 ~ 255 sec
Adjust to preference.
This moves the picture around the screen in small amounts, at set intervals, to
reduce the panel image retention. This is where stationary objects, such as
screen logos, leave a slight image visible after they should have disappeared.
PIP Set Press ENTER button to select the following functions
Source
TV AV SV
Adjust to preference.
Size
Small Medium Large
Adjust to preference.
Position
9 positions for selection:
Upper Left, Upper Center, Upper Right,
Middle Left, Middle Center, Middle Right,
Lower Left, Lower Center, Lower Right
Adjust to preference.
Audio Source
Main PIP
Adjust to preference.
Brightness
Black is subdued for
increased overall
darkness.
Black is set off for
increased overall
brightness.
Adjust to preference.
Contrast
Narrows the gap
between brightness
and darkness.
Broadens the gap
between brightness
and darkness.
Adjust for maximum visibility to suit the ambient brightness.
PIP Display
Color
Decrease color
intensity.
Increase color
intensity.
Adjust to preference.
Swap
Main PIP
Adjust to preference.
TV Channel Setup Press ENTER button to select the following functions (only available under TV mode)
Mode
Position Direct
Select the channel entry method between position setting or direct setting. And
press the ENTER button in SEARCH function to fix it. Please use auto search
when you first use your TV.
• [Position] search the channel by frequency from 48.25~863.25MHz. We
suggest to use these function for the channel setting
• [Direct] search the channel by CCIR PAL B/G table. Provide the faster
speed than position mode, but some channels which are not in the table
may be lost.
Channel Auto
Search
Search (off the function) - Press the ENTER button and it starts the auto tuning.
NOTES: When operating the TV at first time, its TV system is at “default factory mode” and this mode cannot display the image
normally on the screen. In order to watch the TV program without problem, please execute “TV Channel Setup” menu for
normally display..
HITACHI MODEL 42PD6000TA
Downloaded From TV-Manual.com Manuals