Filter
Top Products
34
OTHER FUNCTIONS
Audio Switching
A2 / NICAM / Sound Multiplex (TV mode)
• The I/II button in remote control is useful for NICAM and sound multiplex signals.
Otherwise pressing this button will have no effect.
BILINGUAL / DUAL sound broadcast
When bilingual program is received, sound mode display appears as shown on right.
Press the I/II button to select the sound to be heard.
Each time the button is pressed, I Language A, II Language B, I/II Language A/B or Mono appear cyclically on the screen.
When receiving NICAM signals, NICAM display will appear as below.
Sound multiplex signal received
NICAM signal received
STEREO sound broadcast
When a stereo program is received, sound mode display will appear, and you can press the I/II button to select between stereo and
mono sound.
Each time the button is pressed, Mono or
Stereo appear cyclically on the screen.
When receiving NICAM signals, NICAM display will appear as below.
Sound multiplex signal received
NICAM signal received
Monaural sound broadcast
When a monaural program is received, sound mode display will appear.
NOTE
• If sound signal is not strong enough for quality reception, press the I/II button until appears on the screen to receive a
clear mono sound.
• If sound has hiss noise or keep switching between stereo and mono mode due to signal condition, press the I/II button until
appears on the screen to receive a clear mono sound.
1
ABCDE
I II I/II
NICAM I NICAM II NICAM I/II
NICAM
Yellow
Yellow Yellow
Green
Yellow
Yellow Yellow
Green
NICAM
NICAM
Green
Red
Indicatin
Red
HITACHI MODEL 42PD6000TA
Downloaded From TV-Manual.com Manuals