Filter
Top Products
1616
1616
16
CD CHCD CH
CD CHCD CH
CD CH
AA
AA
A
NGER CONTRNGER CONTR
NGER CONTRNGER CONTR
NGER CONTR
OLOL
OLOL
OL
S/CD ERRS/CD ERR
S/CD ERRS/CD ERR
S/CD ERR
OR CODESOR CODES
OR CODESOR CODES
OR CODES
If a problem should develop while operating the CD changer, the following error codes may
appear on the display panel.
ER-1: Indicates that there is no magazine loaded in the CD changer.
ER-2: Indicates a problem with the magazine eject function.
ER-3: Indicates an error in the disc loading function.
ER-4: Indicates an error in the disc un-loading function.
ER-5: Indicates an error in the magazine position.
ER-6: Indicates an error in the laser pick-up position.
ER-7: Indicates an error in the laser focus on the disc.
In any of the above situations, try ejecting the CD magazine from the changer and make sure
the discs are clean, undamaged, and loaded correctly (refer to the Owner’s Manual of the CD
changer). Re-load the magazine and check for proper operation. You may also try activating
the RESET button
dodo
dodo
do on the unit, but this will also erase the time and pre-set memories.
If the suggested measures do not solve the problem, contact an approved warranty station near
you for further assistance.
CD CHCD CH
CD CHCD CH
CD CH
AA
AA
A
NGER ERRNGER ERR
NGER ERRNGER ERR
NGER ERR
OR CODESOR CODES
OR CODESOR CODES
OR CODES
el el
el el
el
TRACK REPEAT PLAY SELECTOR
(
RPT
)
When the
RPT
button is momentarily
pressed, the RPT indication will appear on
the display panel and play of the current track
will be continually repeated until the Track
Repeat mode is canceled by pressing the
RPT
button again or by activating the Track
Select, Random Play or Scan
functions.
When the
RPT
button is pressed and held for
more than 2 seconds, the disc repeat mode
is activated; DRT will appear on the display
and the play of the current disc will be
continuously repeated. This mode is
canceled in the same manner as before.
emem
emem
em SHUFFLE PLAY SELECTOR (
SHF
)
When the
SHF
button is momentarily pressed,
the SHF indication will appear on the display
panel and the tracks on the disc will be played in
a random, shuffled order. The Track Select
buttons
dsds
dsds
ds
will also select tracks in the shuffled
order instead of the normal progression. The
Track Shuffle mode can be canceled by pressing
the
SHF
button again or by activating the Track
Select, Repeat Play or Scan functions.
When the
SHF
button is pressed and held for
more than 2 seconds, the disc shuffle mode is
activated; DSF will appear on the display and the
play of the discs in the magazine will be played
in a random shuffled order. This mode is canceled
in the same manner as before.