Filter
Top Products
is active, the radio will seek the next strongest
local station when either button is pressed.
bnbn
bnbn
bn
MANUAL SEEK TUNING
This function is used to search rapidly upward
or downward for a desired station. By pressing
either tune button for more than 2 seconds,
the radio will enter the MANUAL seek mode
as displayed momentarily on the panel. When
either button is pressed and held in this
mode, the radio will tune rapidly up or down
and will stop at the station of choice when the
button is released. A momentary press of
either button in this mode will cause the radio
to tune upward or downward two digits at a
time. If tuning is not activated within 5 seconds
of entering the MANUAL mode, the radio will
automatically revert to the default AUTO mode
as indicated momentarily on the panel.
bobo
bobo
bo LOCAL/DISTANT SELECTOR (
LOC
)
This feature is used to select the strength of
the signals at which the radio will stop during
Automatic Up/Down Tuning. Pressing the
button will select the Local setting (LOCAL
will appear on the display panel for 5 seconds)
and tuning will select only strong (local)
stations for reception. Pressing the button
again will select the Distant setting (DX will
appear on the display panel for 5 seconds)
and the tuning will stop at a wider range of
signals, including weaker (more distant)
stations.
bpbp
bpbp
bp FM MONO SELECTOR (MONO)
During FM radio operation, this button is
used to select mono or stereo reception of
the broadcast signal. Under normal reception
conditions, the unit should be left in the
stereo mode as indicated by ST and the
associated signal strength indicator on the
display panel when tuned to an FM stereo
signal. If the stereo signal is too noisy for
comfortable listening, press the MONO button
to switch to mono reception (the ST indication
will disappear from the display panel). To
return to stereo reception mode, press the button
again; the ST indication is displayed.
bqbq
bqbq
bq AUTOMATIC STORE/PRESET SCAN
(AS/PS)
Press this button momentarily to scan the stations
pre-set into the memories on the 3 FM bands or
the AM band. The unit will stop at each pre-set
station for 5 seconds before continuing to the
next pre-set station (the pre-set number on the
display panel will flash during Pre-Set Scan
operation). Press the button again momentarily
to stop Pre-Set Scan operation and remain on
the selected frequency.
Pressing and holding the button for longer than
2 seconds will activate the Auto-Store Tuning
feature which will automatically scan and enter
up to 6 stations into the 6 pre-set memories on
the band in use. After entering the stations into
the memories, the unit will automatically stop at
each station for 5 seconds so each can be
heard. If you have already set the pre-set
memories to your favorite stations, activating the
Auto-Store Tuning feature will erase those
stations and enter the new ones. This feature is
most useful when travelling in a new area where
you are not familiar with the local stations.
brbr
brbr
br STATION PRE-SET MEMORIES
To set any of the 6 pre-set memories in each
band, use the following procedure:
1. Turn the radio on and select the desired
band.
2. Select the first station to be pre-set using the
Automatic Up/Down
bm, or Manual Seek bn
Tuning Controls.
3. Press the pre-set button to be set and
continue to hold it in for approximately 2
seconds. The pre-set number will appear
on the display panel indicating that the
station is now set into that pre-set memory
position. The station can now be recalled at
any time by pressing that button.
4. Repeat the above procedure for the
remaining 5 pre-sets on that band and for
the other 3 bands on the unit.
88
88
8
OPEROPER
OPEROPER
OPER
AA
AA
A
TT
TT
T
ING INSTRUCING INSTRUC
ING INSTRUCING INSTRUC
ING INSTRUC
TT
TT
T
IONSIONS
IONSIONS
IONS