Filter
Top Products
99
99
9
bs bs
bs bs
bs
EQUALIZER (EQ) BUTTON
The EQ button applies preset sound effects to
the unit’s audio output signal.The EQ button,
when pressed, will activate one of the following
operating modes ( CLASSICS, POP M, ROCK M,
DSP OFF or FLAT). If the Equalizer function is
active, as displayed on the panel, and the bass
and/or treble level is set, the Equalizer function
reverts to the FLAT setting. On the other hand, if
the Equalizer function is activated, the bass/
treble setting(s) are ignored. Conversely, when
the Equalizer function is not active, the unit returns
to the user set bass and treble levels.
bt bt
bt bt
bt STATION SCAN (
SCN
) BUTTON
When this button is pressed during radio
operation, each station in the current band will be
scanned in the upward direction; each displayed
station will flash for 5 seconds before moving on
to the next station. If the local mode is active, only
the stronger, nearby stations in the current band
will be scanned. When the desired station
appears, press the SCN button again to remain
on that frequency.
bubu
bubu
bu LIQUID CRYSTAL DISPLAY PANEL
The Liquid Crystal Display (LCD) panel displays
the frequency, time and activated functions,
including a combination audio level/disc
indicator in the form of dual disc icons (
)
with circular bar graphs depicting the the audio
signal. In addition, the display also contains a
receive signal indicator which depicts the relative
strength of the incoming broadcast frequency.
NOTE: It is a characteristic of LCD panels that,
if subjected to cold temperatures for an
extended period of time, they may take
longer to illuminate than under normal
conditions. In addition, the visibility of
the numbers on the LCD may slightly
decrease. The LCD read-out will return
to normal when the temperature
Increases to a normal range.
clcl
clcl
cl DISC SLOT
Gently insert the disc into the slot (label surface
facing up) until the soft-loading mechanism
engages and pulls the disc in. The S--CDP
indication will appear on the display panel for
5 seconds, the center of the disc
( )
indication illuminates and becomes animated,
and the track number and elapsed time appear
on the display panel.
CAUTION: This unit is designed for play of
standard 5" (12cm) compact
discs
ONLY. Do not attempt to
use 3" (8cm) CD-Singles in this
unit, either with or without an
adapter, as damage to the player
and/or disc can occur. Such
damage will not be covered by the
Warranty on this product.
cmcm
cmcm
cm TRACK SELECT ( / )
The Track Select function of the Tune/Seek/
Track buttons is used to quickly access the
beginning of a particular track when a disc is
in play. Each time the Forward Track Select
(
) button is pressed, the next higher track
number will be selected as shown on the
display panel. Similarly, each time the
Backward Track Select (
) is pressed, the
next lower track number will be selected as
shown on the display panel.
cncn
cncn
cn
CUE/REVIEW FUNCTIONS ( / )
High-speed audible search to any section of
the disc can be made by the Cue and Review
functions. Press and hold the Cue (
) button
to advance rapidly in the forward direction (the
advancing disc playing time will be shown on
the display panel, except for discs formatted
with MP3 audio), or the Review (
) button to
advance rapidly in the backward direction (the
decreasing disc playing time will be shown on
the display panel, except for discs formatted
with MP3 audio).
9
OPEROPER
OPEROPER
OPER
AA
AA
A
TT
TT
T
ING INSTRUCING INSTRUC
ING INSTRUCING INSTRUC
ING INSTRUC
TT
TT
T
IONSIONS
IONSIONS
IONS