Filter
Top Products
12
Dual illumination
When press the MUTE button for more than 2 seconds, it is activated as selecting Blue or Red buttons illumination.
Volume control/SELECT
Rotating this knob, you can adjust VOL/BASS/TREB/BAL/FAD. To select the functions, press SEL button shortly until
the desired functions are shown on the display.
Increase or decrease the volume by turn the VOL knob right or left. These buttons can be used to adjust the BASS,
TREBLE, BALANCE and FADER.
Other functions
To choose the corresponding mode, press SEL button for 2 seconds, and then press it repeatedly until the display shows the
mode. Rotate the knob to choose the needed value. After choosing, please leave the unit idle to activate.
TA SEEK/TA ALARM
In TA SEEK mode, the unit will seek for traffic announcement program when TA is pressed; in TA ALARM mode the
alarm is set off.
MASK DPI/MASK ALL
During MASK DPI mode, the unit will mask only the AF which has different PI, this is the default mode; during MASK
ALL mode, the unit will mask the AF which has different PI and no RDS signal with high field strength.