Insignia NS-40D510MX15 Car Satellite TV System User Manual


 
37
NS-40D510MX15 Insignia 40" LED TV
www.insigniaproducts.com
13 Press S or T to highlight Antenna, Cable
Service, or Satellite Service, then press ENTER.
A If you select Antenna, your TV scans for
available channels. The scan may take
several minutes.
B If you select Cable Service, a message asks if
you have a cable box:
Select No, then press ENTER if no cable
box is connected. Your TV scans for
available channels. The scan may take
several minutes.
Select Ye s , then press ENTER if a cable box
is connected. A message asks how you
connected the cable box to your TV.
Select HDMI, Component, or AV, then
press ENTER if you connected a cable
box to your TV using one of these
cables. Read the message, then press
ENTER to close the wizard.
Select Coaxial, then press ENTER if you
connected a cable box to your TV using
a coaxial cable. Read the message, then
press ENTER to start the channel scan
(VHF channels only).
Note
You can press EXIT to stop the auto
channel search, but you will need to run
the auto channel search again to create a
channel list.
Note
You can press EXIT to stop the auto channel
search, but you will need to run the auto
channel search again to create a channel
list.
NS-40D510MX15_14-0757_MAN_V1_ENG.book Page 37 Friday, August 8, 2014 10:31 AM