Insignia NS-A1000 Car Amplifier User Manual


 
13
Insignia NS-A1000 Car Stereo Amplifier
www.insignia-products.com
Specifications
5 H PF Set for High Pass Filter frequency (40 Hz to
250 Hz).
6 Remote bass
control knob
Turn clockwise to increase the bass output of your
amplifier (0-18 dB) without adjusting the amplifier.
7 X-Over Set for High Pass Filter, Low Pass Filter, or Full.
8 L PF Set for Low Pass Filter frequency (40 Hz to
250 Hz).
9Power/
protection
indicator LED
Green LED lit—Amplifier is on and functioning
correctly.
Red LED lit—Amplifier is in self-protect mode.
10 Line Output Use these connections to feed audio to a second
amplifier. Line output is affected by the cross-over
settings on the amplifier.
Model NS-A1000
@ 2 Ohms 155 W × 2 channels
@ 1% THD
@ 4 Ohms 110 W × 2 channels
@ 1% THD
Mono 320 W @ 1% THD
Signal to Noise ratio >98 dB
Channel separation >55 dB
Frequency response ±1.0 dB 10 Hz - 30 KHz
HPF 40 Hz - 250 Hz
LPF 40 Hz - 250 Hz
Adjustable sensitivity range 0.2-1 V
Input - low level 10K Ohms
Impedance - high level 100 Ohms
Fuse 25AX2
Dimensions (W × H × L) 10.2 × 2.1 × 12.8 in
(25.9 × 5.33 × 32.5 cm)
Item Name Function or Control