Filter
Top Products
16
NS-C5111 Car Deck
www.insignia-products.com
Listening to radio
To listen to the radio:
1 Press the
MODE button on your car deck or remote control one or
more times until
TUNER appears on the LCD. The currently
selected radio frequency appears of the LCD.
2 Press the
BD/ENT/SUB button on your car deck or the
BAND/ENTER button on your remote control one or more times to
select the radio band you want. You can select:
•FM1
•FM2
•FM3
•AM1
•AM2
3 If you want to manually select a station, press and hold the or
button on your car deck or remote control for more than one
second. You car deck tunes to the next available station. Press
one of the buttons again to go to another station.
4 If you want to scan for a station, press and release the or
button. Your car deck goes to the next available station and plays
the station for two seconds, then it goes to the next station. When
you hear the station you want, press the same button again to stop
the scan and play the station.
5 If you want to listen to a station assigned to a preset, press the
preset button on your car deck or remote control.
Setting up presets
You can assign a radio station to one of the preset buttons. When you
want to listen to the assigned station, press the preset button for that
station.
To set up a preset:
1 Press the
MODE button on your car deck or remote control one or
more times until
TUNER appears on the LCD. The currently
selected radio station appears of the LCD.
2 Press the
BD/ENT/SUB button on your car deck or the
BAND/ENTER button on your remote control one or more times to
select the radio band you want. You can select:
•FM1
•FM2
•FM3
•AM1
•AM2