Filter
Top Products
10
Steering Wheel Controls
The Multifunction display in the gauge cluster must be in “Audio mode” for
the steering wheel controls to operate the Media Gateway.
Press the “▲” arrow on the steering wheel controls to seek up.
Press the “▼” arrow on the steering wheel controls to seek down.
Storing stations into preset memory
Press “OK” access the preset memory menu.
Use the “▲” and “▼” buttons to cycle through the preset locations (1-18FM, or 1-6 AM)
Press “OK” to store the current station into the location displayed on the
radio, for example PRE1.
Recall a station from preset memory
Press “OK” to access the preset memory menu.
Use the “▲” and “▼” buttons to cycle through the preset locations. When
the desired preset is displayed, wait 3 seconds, the radio will auto select
the station.
PLEASE NOTE: In the 2009 VW CC the “OK” button does not
function. In this vehicle you will only be able to seek through the
stations with the < or > buttons on the left side of the steering wheel.
Delphi Radio Controls
Seek Up
Press the ”SEEK▲” button to seek up to next available station.
Seek Down
Press the ”▼SEEK” button to seek down to the next available station.
Manually Tune
Turn the Tune knob to manually tune. Clockwise will tune up, Counter-
clockwise will tune down.
Storing stations into Preset memory
Tune to a station you wish to save into Preset memory. Press and hold the
Preset button (1-6) where you want to store the preset. Holding the preset
button for two seconds will store the station into memory.
PLEASE NOTE: If using the HDRT in conjunction with the SCC1, the
HD Radio preset text will overwrite the SCC1 preset text, however the
presets will still operate normally.
Recall a station from Preset memory
Press the preset button (1-6) to recall the station stored in that location.