Filter
Top Products
11
8.Sirius Satellite Radio Operation
(if equipped)
Entering Mode Select Menu
Press the “SAT” button. Press the “CAT FLDR” ▲ or ▼ button to cycle
through the Media Gateway sources until SIRIUS is displayed. Wait 6
seconds and the radio will select the displayed option.
PLEASE NOTE: If you are listening to Satellite Radio and wish to
switch the Media Gateway source, you must press the TUNE KNOB
twice before pressing the “CAT FLDR” ▲ or ▼ button. If the radio still
does not go into the mode select menu, press and hold the TUNE
KNOB until the radio menu is displayed. Turn the TUNE KNOB until
the radio displays”SELECT SCAN SAT”. Press the preset button
underneath “Channels”. Press and hold the TUNE KNOB to exit
the radio menu. You should now be able to access the mode select
menu.
Channel Up
Turn the rotary TUNE KNOB clockwise to move up through the channels
Channel Down
Turn the rotary TUNE KNOB counter-clockwise to move down through the
channels
Category Up
Press the “CAT FLDR ▲” button to move up through the categories.
Category Down
Press the “CAT FLDR ▼” button to move down through the categories.
Store Presets
Press and hold the preset button on which you want to store the channel.
PLEASE NOTE: If using the HDRT in conjunction with the SCC1, the
HD Radio preset text will overwrite the SCC1 preset text, however the
presets will still operate normally
Recall Presets
Press the preset button that corresponds with the channel you want to
recall.
Steering Wheel Controls
Press the “▲” button to cycle up through the presets.
Press the “▼” button to cycle down through the presets.