Jensen HD5313 Car Stereo System User Manual


 
8
HD5313
CD Player Operation
CD mode can only be accessed when a disc is inserted. If a disc is already
in place, press the SRC button (2) to access CD mode and begin playback
automatically.
Insert CD
Press the button (9) and
allow the front panel to fold
down to display the disc
slot. With the label surface
facing up, fully insert a
compact disc into the slot
until the mechanism
engages and pulls the disc
in. After inserting a disc, lift
the front panel up to return
it to the closed position and
begin playing the disc.
Eject CD
To eject a disc, first press
the button (9) and allow
the front panel to fold down
to display the disc slot (24).
Press the eject button (25) located to the left of the disc slot to eject the
disc. If the disc is not removed from the unit within 15 seconds, the disc will
be reloaded to prevent accidental damage.
NOTE: The unit is designed for play of standard 5” (12 cm.) compact
discs only. Do not attempt to use 3” (8 cm.) CD singles in this unit,
either with or without an adaptor, as damage to the player and/or the
disc may occur. Such damage will not be covered by the warranty on
this product.
Pause
Press the 1/>/|| button (13) to suspend disc play. Press the play/pause
button again to resume disc play.
Track Select
Press the >>| (10) or |<< (11) button for less than one second to advance to
the next track on the CD. The selected track number will appear on the
display. Press and hold the >>| (10) or |<< (11) button for more than one
second to fast forward or fast reverse through the disc. CD play starts when
the button is released.
Intro Scan (INT)
During disc play, press 2/INT (14) to play the first 10 seconds of each track
on the disc. When the desired track is reached, press 2/INT again to end
the scan and play the selected track.
Repeat (RPT)
Press 3/RPT (15) during disc play to continuously repeat the track. Press
3/RPT again to stop repeating.
Random (RDM)
Press 4/RDM (16) during disc play to play all tracks on a CD in random,
shuffled order. Press 4/RDM again to stop random play.
Display ID3 Tag Information
Press the DISP button (7) to display any text encoded on the CD (song title,
artist, etc.).
CD Player Error Codes
If a problem should develop while operating the CD player, one of the
following error codes may appear on the display panel:
ERROR-1: Mechanical error (insert disc/eject disc)
ERROR-2: Servo disc error
24
25
HD5313
9
RESET
1
2
4
7
10
11
3
5
6
8
9
20
12
19
21
13
23
14
16
15 17 18
22
HD5313
22