Filter
Top Products
13
HD5313
iPod Operation
Accessing iPod Mode
This unit is equipped with an iPod ready function that will allow you to
control your iPod (if compatible) using the front panel control buttons. The
following iPod versions are supported:
• iPod Nano 4G
• iPod Classic
•iPod Touch
• iPod Nano 3G
NOTE: Use the Apple 30-pin iPod to USB cable that came with your
iPod to connect the iPod to the USB connector.
The unit will automatically switch to iPod mode when an iPod is plugged
into the USB connector. To return to the iPod menu from any other source
menu, press the SRC button (2) on the front panel until “IPOD” appears on
the display.
NOTE: The HD5313 will not select video files regardless of whether or
not a video file was the last file playing when the iPod was plugged
into the radio. Only music files are supported.
Turning the iPod On/Off
The iPod power turns on automatically when the iPod is connected to the
30-pin iPod cable, as long as the automobile ignition is turned on. You can
turn the iPod off by disconnecting it from the cable or by turning the ignition
off. When the ignition is turned off, the iPod will pause and then enter sleep
mode after 2 minutes.
NOTE: When connected, the iPod will continuously recharge when the
unit is in iPod mode, as long as the vehicle ignition is turned on.
Display Information
iPod song information, when available, appears on the LCD screen
automatically during playback. Press the DISP button (7) to manually
display iPod playback information in the following order:
• Track/Elapsed Time
• Clock
• Song TITLE
•ARTIST
• CATEGORY (Album Name)
Play/Pause
Press the 1/>/|| button (13) to suspend or resume play. “PAUSE” flashes on
the display when paused.
Track Selection
Select a Track
Press the >>| (10) or |<< (11) for less than 1 second to advance to the next
song in the current category. When a song has been playing for at least one
second, press the |<< (11) to replay the song from the beginning. When a
song has been playing for more than one second, you must press |<< twice
to move to the previous file.
Fast Forward / Fast Reverse
Press and hold the >>| (10) or |<< (11) for more than 1 second to fast
forward or fast reverse. Playback begins when the button is released.
Repeat (RPT)
Press the RPT button (15) once during disc play to select “REPEAT SONG”
and continuously repeat the selected song.
Press RPT twice to select “RPT ALBM” and continuously repeat the entire
album/folder.
Press RPT a third time to select “RPT OFF” and stop the repeat function.
1
2
4
7
10
11
3
5
6
8
9
20
12
19
21
13
23
14
16
15 17
18
22
HD5313
22