Jensen VM8013HD Car Video System User Manual


 
VM8013HD
19
SETUP MENU
During disc play, press the SETUP button (4) on the remote control to
access the SYSTEM SETUP menu.
Use the , , or cursor buttons to choose between LANGUAGE,
VIDEO, AUDIO, RATING or MISC setup options.
Table 2: System Setup Menu
LANGUAGE MENU
OSD language English Select the appropriate on-screen language for the
DVD
Espanol
Subtitle English Choose the language you would like subtitles to
appear in (if available)
French
Spanish
Portuguese
German
Off Turn subtitles off
DVD menu English Choose the language you would like DVD menu
to appear in (if available)
French
Spanish
German
Portuguese
VIDEO MENU
Aspect Ratio 4:3 Image is presented with 4:3 aspect ratio.
16:9 Image is presented in wide view with a 16:9
aspect ratio.
Video Format NTSC The color signals are output in the standard NTSC
format.
PAL The color signals are output in the standard PAL
format.
SETUP MENU
01:02
AM
Language Menu
LANGUAGE VIDEO AUDIO
RATING MISC
AUTO The color signal output is switched automatically
based on the current video input signal - NTSC or
PAL.
Smart Picture Standard
Bright
Soft
AUDIO MENU
Audio Menu English Select the appropriate audio language for the
DVD.
French
Spanish
German
Portuguese
RATING MENU
Set Password _ _ _ _ Enter a 4-digit password to activate the “Rating”
feature. The original password is “0000” and must
be entered before you can change the password
to a different 4-digit code.
Parental CTR 1 KID SAFE Select the appropriate rating level for the intended
audience.
You may override higher ratings by using your
password.
2 G
3 PG
4 PG13
5 PG-R
6 R
7 NC-17
8 ADULT
MISC MENU
Use Default
Settings
Yes/No Select “Yes” to restore the factory default settings.
Demo Run Demo Mode scrolls through the various source
screens, simulating activity on the display. “Demo
Mode” is discreetly displayed in yellow text (below
the clock), to indicate the unit is in Demo Mode. To
stop Demo Mode, press and hold the SRC button.
Auto Run On When “Demo Auto Run” is On, the unit will
automatically display Demo Mode when powered
on.
Off When "Auto Run" is Off, you can select "Demo >
Run" to start Demo Mode.
Table 2: System Setup Menu