Filter
Top Products
33
VM9215BT
If the monitor is in display mode, the monitor automatically switches to CAMERA
mode upon reverse driving. When the reverse driving stops, the monitor return to
its original input mode.
Demo Sub-menu Features
The Demo mode is on and set to Auto run by default. The Demo mode will
display various user interface TFT display pages such as the Radio, Disc, Aux In,
and Camera sources. The Demo mode will also display the Equalizer and Settings
menu pages. Touching any portion of the touch screen will pause the Demo mode
temporarily. If the touch screen is not pressed again (within 30 seconds) the Demo
mode will resume.
To turn the Demo mode o , access the Settings Menu and turn Auto run to OFF.
TS Cal (Screen Calibration)
To access the “Screen Calibration” function from the SETTINGS MENU, select the
“TS CAL” option.
After entering calibration mode, a crosshair + appears in a corner quadrant of the
screen. To begin calibration, touch and hold the crosshair for one second until it
moves to the next quadrant. Continue for each quadrant until the calibration is
completed.
Exiting the System Settings Menu
To exit setup mode and resume normal playback, touch the Setting icon on the
screen.