Jensen VM9215BT Car Stereo System User Manual


 
50
VM9215BT
MP3/WMA OPERATION
Opening/Closing the TFT Monitor
Open TFT Monitor
Press the OPEN button on the front panel or press the button on the remote
control to activate the mechanism that moves the display panel into the viewing
position.
Close TFT Monitor
Press the OPEN button on the front panel or press the button on the remote
control to load the display panel back into the compartment.
Media and File Requirements
This player allows you to play back MP3 and WMA  les recorded onto CD-R/RWs,
DVD+R/RWs, and DVD-R/RWs. For CD-RW discs, please make sure it is formatted
using the full method and not the quick method to prevent illegal disc operation.
For the greatest  le capacity, Dual Layer DVD’s can be used when burning music to
a disc.
MP3 Format Compatibility
The  le naming formats listed below are compatible with this unit:
ISO 9660 –  le name: 12 characters,  le extension: 3 characters
ISO 9660 –  le name: 31 characters,  le extension: 3 characters
Joliet – 64 characters
If the  le or folder name does not conform to ISO 9660  le system standards, it
may not be displayed or played back correctly. Use the following settings when
compressing audio data for your MP3 disc:
Transfer Bit Rate: 128 kbps
Sampling Frequency: 48 kHz
When recording MP3 up to the maximum disc capacity, disable additional writing.
For recording on an empty disc up to maximum disc capacity, use the “Disc at
once” setting.
MP3 Playing Order
When selected for play,  les and folders (Folder Search, File Search or Folder
Select) are accessed in the order they were written by the CD writer. As a result,
the order in which they are expected to be played may not match the order in
which they are actually played. You may be able to set the order in which MP3/
WMA  les are to be played by writing them onto a medium such as a CD-R with
their  le names beginning with play sequence numbers such as “01” to “99”.