Filter
Top Products
6
VM9224BT
OPERATING INSTRUCTIONS
Power On / Off
Press the /SRC button (4) to turn the unit on. The buttons on the front of the
unit light up and the current mode status appears on the LCD (7).
Press and hold the button to power off the unit.
Audible Beep Confirmation
An audible beep tone confirms each function selection. The Beep tone can be
disabled through the Setup menu.
Mute/Line Mute
Press the rotary encoder button (7) to mute the volume from the unit. Press the
rotary encoder button again to restore the volume. “MUTE” is displayed on the
LCD. Adjusting the volume or using any of the audio setup features cancels
the mute function.
If the “MUTE” wire is connected, audio output mutes when a telephone call is
received by the car phone or when verbal navigation is performed (using
optional NAV102).
Playing Source Selection
When the monitor is closed, press the SRC button (4) to change between
available audio playing sources in the following order: RADIO, DISC, USB1,
USB2, SD, BT, NAV, AUX and CAMERA.
Source Menu
You can also use the touch screen to change the source through the SOURCE
MENU. To access the SOURCE MENU, touch the top left corner of the screen
or press the SRC button (4).
SOURCE MENU
RADIO
RADIO
BT
DISC
NAV
USB1
AUX
USB2 SD
CAMERA
N
S
E
W
8GB