Jensen VM9224BT Car Stereo System User Manual


 
31
VM9224BT
For example, a medium with the
following folder/file hierarchy is
subject to Folder Search, File
Search or Folder Select, as shown
below.
The VM9224BT player will only
recognize three folder levels and
does not display folders containing
only other folders. In the example
above, the unit will display folders
3, 4, 6, and 8, but not 2 and 7 since
they do not contain any tracks
directly. Folder 5 is not recognized
at all since it is at the fourth level.
Inserting a USB Device or SD Card
NOTE: The USB port will recognize most USB flash memory devices and
portable hard drives (hard drives must be formatted to FAT32 and NTFS
is not supported).
1. Locate the USB/SD connector cover (8) on the front of the radio.
2. Lift the protective cover to reveal the connectors.
3. Insert the USB device or SD card into the appropriate connector. The unit
will read the audio/video files automatically.
To remove the USB device or SD card, press the SRC button (4) or use the
SOURCE MENU to switch to another mode, and then remove the device from
the connector.
Type A USB
Connector
OPEN
MUTE
VM9224BT