Filter
Top Products
18
ENGLISH
Indications Selectable settings, [reference page]
TEL MUTING*
1
Telephone muting
MUTING 1/
MUTING 2:
Select either one which mutes the sounds while using a cellular phone system.
MUTING OFF: [Initial]; Cancels.
• When “CD” or “CD-CH/IPOD” has been selected as the source, playback pauses during
telephone muting.
SCROLL*
2
Scroll mode
ONCE: [Initial]; Scrolls the information once.
AUTO: Repeats scrolling (5-second intervals).
OFF: Cancels.
• Pressing DISP for more than one second can scroll the display regardless of the setting.
SUB.W FREQ
Subwoofer cutoff
frequency
LOW: Frequencies lower than 90 Hz are sent to the subwoofer.
MID: [Initial]; Frequencies lower than 135 Hz are sent to the subwoofer.
HIGH: Frequencies lower than 180 Hz are sent to the subwoofer.
EXT INPUT*
3
External input
CHANGER: [Initial]; To use a JVC CD changer, [11] or an Apple iPod, [28].
EXT INPUT: To use any other external component than the above, [30].
• For connecting KS-BTA200, [19]/KS-SRA100, [25]/XMDJVC100 [25], this setting is not
required. It is automatically detected.
TAG DISPLAY*
2
Tag display
TAG ON: [Initial]; Shows the Tag information while playing MP3/WMA tracks, [13].
TAG OFF: Cancels.
AMP GAIN
Amplifier gain control
You can change the maximum volume level of this unit.
HIGH POWER: [Initial]; VOL 00 – VOL 50
LOW POWER: VOL 00 – VOL 30 (Select this if the maximum power of the speaker is less than
50 W to prevent them from being damaged.)
OFF: Deactivates the built-in amplifier.
IF BAND
Intermediate frequency
band
AUTO: [Initial]; Increases the tuner selectivity to reduce interference noises between
the stations. (The stereo effect will be lost.)
WIDE: Subject to the interference noises from adjacent stations, but sound quality will
not be degraded. (The stereo effect will not be lost.)
AREA
Tuner channel interval
AREA US: [Initial]; When using the unit in North/Central/South America. The AM/FM
intervals are set to 10 kHz/200 kHz.
AREA EU: When using the unit in any other areas. The AM/FM intervals are set to
9 kHz/50 kHz (100 kHz during auto search).
AREA SA: When using the unit in South American countries where the FM interval is
100 kHz. The AM interval is set to 10 kHz.
SEARCH MODE
Radio station search
mode
You can change radio station search mode operation using the 4
/¢
buttons.
MANUAL: [Initial]; To search for stations manually—for Manual search, [8].
HD SEEK: To search for HD Radio stations only—for HD search, [9].
CS ON HD*
1
CS-A mode standby on
HD Radio broadcasting
AUTO: When the unit tunes in to a radio broadcast encoded with CS II, the CS-A mode
(see page 15) is automatically set to “USER” even though you have set the mode
to “OFF.”
OFF: [Initial]; Cancels.
*
1
KD-AHD39 only
*
2
Some characters or symbols will not be shown correctly (or will be blanked out) on the display.
*
3
Not displayed when the component connected to the CD changer jack is selected as the source.
EN_KDHDR30AHD39_f.indb 18EN_KDHDR30AHD39_f.indb 18 07.11.16 6:50:10 PM07.11.16 6:50:10 PM