Filter
Top Products
ENGLISH
19
Ÿ Select “NEW DEVICE” then enter the
Bluetooth menu.
! Select a desired item.
Registering using “OPEN”
In step ! above...
1 Select “OPEN.”
2 Enter a PIN (Personal Identification Number)* code
into the unit.
• You can enter any number you like (1-digit to 16-
digit number).
* Some devices have their own PIN code. Enter the
specified PIN code into the unit.
3 Confirm the entry.
Bluetooth® operations
For Bluetooth operations, it is required to connect the
Bluetooth Adapter (KS-BTA200) to the CD changer jack on
the rear.
• Refer also to the instructions supplied with the Bluetooth
adapter and the Bluetooth device.
• Refer to the list (included in the box) to see the countries
where you may use the Bluetooth® function.
Preparation: Operate the device to turn on its Bluetooth
function.
To use a Bluetooth device through the unit (“BT-PHONE”
and “BT-AUDIO”) for the first time, you need to establish
a Bluetooth wireless connection between the unit and the
device.
• Once the connection is established, it is registered on the
unit even if you reset your unit. Up to five devices can be
registered in total.
• Only one device can be connected at a time for each
source (“BT-PHONE” and “BT-AUDIO”).
Connecting a Bluetooth device
for the first time
Registration (Pairing) methods
Use either of the following items in the Bluetooth menu to
register and establish the connection with a device.
• Select “BT-PHONE” or “BT-AUDIO” as the source to
operate the Bluetooth menu.
OPEN: Make the unit ready to establish a new Bluetooth
connection. The connection is established by
operating the Bluetooth device.
SEARCH: Make the unit ready to establish a new Bluetooth
connection. The connection is established by
operating the unit.
Basic operations
~
Continued on the next page
EN_KDHDR30AHD39_f.indb 19EN_KDHDR30AHD39_f.indb 19 07.11.16 6:50:10 PM07.11.16 6:50:10 PM