Filter
Top Products
17
ENGLISH
CD OPERATIONS
Playing a CD
1
Open the loading slot.
The control panel moves down,
and the loading slot appears.
Note:
When an external component is
connected to the Auxiliary input jack,
Be careful of handling a CD.
2
Insert a disc into the loading slot.
The unit draws a CD, the
control panel goes back
to the previous position
(see page 28), and CD
play starts automatically.
The display changes to show the following:
Notes:
• When a CD is in the loading slot, selecting “CD” as
the source by pressing SOURCE starts CD play.
• When a CD is inserted upside down, the CD
automatically ejects.
• When you play a CD Text, the disc title and performer
appear on the display. Then the current track title
appears on the display, followed by the truck number
and elapsed playing time. See also “Playing a CD
Text” (page 18) and “To select the scroll mode –
SCROLL” (page 25).
If a CD Text includes much text information, some may
not appear on the display.
• If you change the source, CD play also stops (without
ejecting the CD).
To stop play and eject the CD
Press 0.
CD play stops, the control panel moves down,
then the CD automatically ejects from the loading
slot.
To return the control panel to the previous
position, press 0 again.
• If you keep the loading slot for one minute (or 30
seconds when you have ejected a disc with the
ignition key is turned to “OFF”) a beep sounds
and the control panel returns to the previous
position.
Pay attention to prevent CD and your finger from
being caught in between the control panel and
the unit.
Note:
If the ejected disc is not removed for about 15 seconds,
the disc is automatically inserted again into the loading
slot to protect it from dust. (CD play will not start this
time.)
Total track number of
the inserted disc
Total playing time of the
inserted disc
Current track Elapsed playing time
EN17-19.KD-SH77R/55R[E] 2/9/01, 3:56 PM17