Filter
Top Products
8
ENGLISH
Listening to the radio
You can use either automatic searching or
manual searching to tune into a particular station.
Searching a station automatically:
Auto search
1
Select the FM or AM.
1 Press SOURCE
repeatedly to select FM
or AM as the source.
2 If necessary, to select
the FM band number,
press and hold M/B
(mode/band) for more
than 1 second
repeatedly.
Each time you press and
hold the button, the FM
band changes as follows:
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to
an FM broadcast.
2
Start searching a station.
When a station is received, searching
stops.
To stop searching before a station is
received, press the same button you have
pressed for searching.
To turn in FM stations only with strong signals
1 Press M/B (mode/band) to enter the functions
mode while listening to an FM broadcast and
then, the number buttons can work as different
function buttons. (See page 4.)
2 Press LO (local) while still in the functions
mode, so that the LOCAL indicator lights up on
the display.
This function works only while searching FM
stations, including SSM preset.
Each time you press the button, the LOCAL
indicator lights up and goes off alternately.
Searching a station manually:
Manual search
1
Select the FM or AM.
1 Press SOURCE
repeatedly to select FM
or AM as the source.
2 If necessary, to select
the FM band nunber,
press and hold M/B
(mode/band) for more
than 1 second
repeatedly. Each time
you press and hold the
button, the FM band
changes as follows:
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to
an FM broadcast.
RADIO BASIC OPERATIONS
FM 1 FM 2 FM 3
FM 1 FM 2 FM 3
Selected band appears.
Press ¢ to search
stations of higher
frequencies.
Press 4 to search
stations of lower
frequencies.
EN08-10.KD-SH77R/55R[E] 2/9/01, 3:55 PM8