Filter
Top Products
7
ENGLISH
1
Turn on the power and select the
source.
When you press the button for
the first time, the power comes
on. Then each time you press
the button, the source changes
as follows.
* If a CD is not in the loading slot, you cannot
select CD as the source to play.
** Without connecting the DAB Tuner or the CD
changer, you cannot select it as the source to
play.
***ONLY for KD-SH55R: To select the external
component, you have to change the external
component setting (see page 26).
To operate the tuner (FM or AM),
see pages 8 – 10.
To operate the CD player,
see pages 17 – 19.
To operate external components (AUX
INPUT and LINE INPUT),
see pages 30 – 31.
To operate the CD changer,
see pages 32 – 33.
To operate the DAB tuner,
see pages 34 – 37.
2
Adjust the volume.
Note:
After adjusting the volume, you can push in the
control dial to avoid unintended operations.
To use it again, push the control dial again to
make it come out.
3
Adjust the sound as you want.
(See page 20.)
To drop the volume in a moment
Press and hold /ATT while listening to any
source. “ATT” starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press and
hold the button again.
• If you turn the control dial clockwise, you can
also restore the sound.
To turn off the power
Press and hold SOURCE until “SEE YOU”
appears on the display.
To increase the volume.
BASIC OPERATIONS
To decrease the volume.
Volume level indicator
Volume level appears.
2
1
Note:
When you use this unit for
the first time, set the built-in
clock correctly, see page 23.
FM TUNER
*
*
For KD-SH77R
CD PLAY
DAB TUNER
CD CHANGER
LINE INPUT
AUX INPUT
AM TUNER
**
**
**
CD CHANGER
**
FM TUNER
For KD-SH55R
CD PLAY
DAB TUNER
LINE INPUT
AUX INPUT
AM TUNER
or
***
EN07-07.KD-SH77R/55R[E] 2/9/01, 3:55 PM7