JVC CH-X100 Car Stereo System User Manual


 
ENGLISH
23
Before using the remote controller:
Aim the remote controller directly at the remote
sensor on the main unit. Make sure there is no
obstacle in between.
Do not expose the remote sensor to strong
light (direct sunlight or artificial lighting).
Installing the battery
When the controllable range or effectiveness of the
remote controller decreases, replace the battery.
Do not leave the remote controller in a place
(such as the dashboard) exposed to direct
sunlight for a long time.
1. Remove the battery holder.
1) Push out the battery holder in the direction
indicated by the arrow using a ball-point
pen or a similar tool.
2) Remove the battery holder.
USING THE REMOTE CONTROLLER
2. Place the battery.
Slide the battery into the holder with the + side
facing upwards so that the battery is fixed in
the holder.
3. Return the battery holder.
Insert again the battery holder pushing it until
you hear a clicking sound.
WARNING:
Store the battery in a place where children
cannot reach.
If a child accidentally swallows the battery,
consult a doctor immediately.
Do not recharge, short, disassemble or heat the
battery or dispose it in a fire.
Doing any of these things may cause the battery
to give off heat, crack or start a fire.
Do not leave the battery with other metallic
materials.
Doing this may cause the battery to give off heat,
crack or start a fire.
When throwing away or saving the battery, wrap
it in tape and insulate; otherwise, the battery may
start to give off heat, crack or start a fire.
Do not poke the battery with tweezers or
similar tools.
Doing this may cause the battery to give off heat,
crack or start a fire.
CAUTION:
DO NOT leave the remote controller in a place
(such as dashboards) exposed to direct sunlight for
a long time. Otherwise it may be damaged.
Lithium coin battery
(product number:
CR2025)
(back side)
Remote sensor
1)
2)
(back side)
EN23-24-KS-FX621[U]f 12/12/02, 7:15 PM23