JVC CH-X100 Car Stereo System User Manual


 
25
ENGLISH
TROUBLESHOOTING
What appears to be trouble is not always serious. Check the following points before calling a service
center.
Symptoms Causes Remedies
A cassette tape cannot be You have tried to insert a cassette Insert the cassette with the
inserted. in the wrong way. exposed tape facing to the right.
A cassette tape cannot be Cassette ejection is prohibited. While holding TAPE 23,
ejected. press 0 (eject) for more than
2 seconds. (see page 11.)
Cassette tapes become hot. This is not a malfunction.
Tape sound is at very low The tape head is dirty. Clean it with a head cleaning
level and sound quality is tape.
degraded.
Sound is sometimes Connections are not good. Check the cords and
interrupted. connections.
Sound cannot be heard from The volume level is set to the Adjust it to the optimum level.
the speakers. minimum level.
Connections are incorrect. Check the cords and
connections.
SSM (Strong-station Signals are too weak. Store stations manually.
Sequential Memory)
automatic preset does
not work.
Static noise while listening The antenna is not connected Connect the antenna firmly.
to the radio. firmly.
This unit does not work at all. The built-in microcomputer While holding SEL (select),
may function incorrectly due press (standby/on/
to noise, etc. attenuator) for more than
2 seconds. (The clock setting
and preset stations stored in
memory are erased.)
(See page 2.)
EN25-28.KS-FX621[U]f-1 12/13/02, 1:29 PM25