JVC CH-X100 Car Stereo System User Manual


 
27
ENGLISH
This unit requires very little attention, but you will
be able to extend the life of the unit if you follow
the instructions below.
To clean the head
Clean the head after every 10 hours of use using
a wet-type head cleaning tape (available at an
audio store).
When the head becomes dirty, you may realize
the following symptoms:
Sound quality is reduced.
Sound level decreases.
Sound drops out.
Do not play dirty or dusty tapes.
Do not touch the highly-polished head with any
metallic or magnetic tools.
To keep the tape clean
Always store the cassettes in their storage cases
after use.
Do not store cassettes in the following places:
Subject to direct sunlight
With high humidity
At extremely hot temperatures
MAINTENANCE
CAUTION:
Do not play the cassettes with peeling labels;
otherwise, they can damage the unit.
Tighten tapes to remove slack since loose tape
may become entangled with the mechanism.
Do not leave a cassette in the cassette
compartment after use, as the tape may
become slack.
The function below is also provided to ensure the
longer life of this unit.
Ignition key-off release/Ignition
key-on play
Turning off the ignition key with a cassette in the
compartment automatically releases the tape
from the units tapehead.
Turning on the ignition key with a cassette in the
compartment starts playback automatically if you
turned off the ignition during tape play.
EN25-28.KS-FX621[U]f 12/13/02, 8:55 AM27