Filter
Top Products
SETTINGS
41
ENGLISH
Menu items Selectable settings, [reference page]
Disc Setup 2*
7
D. Audio Output Select the signal format emitted through the DIGITAL OUT (optical)
terminals. (☞ also page 52)
PCM Only : Select this when connecting an amplifier or a decoder
incompatible with Dolby Digital, DTS, or MPEG Audio, or
connecting to a recording device.
Dolby Digital : Select this when connecting an amplifier or a decoder
compatible with Dolby Digital.
Stream : Select this when connecting an amplifier or a decoder
compatible with Dolby Digital, DTS, or MPEG Audio.
Down Mix When playing back a multi-channel disc, this setting affects the signals
reproduced through the LINE OUT plugs.
Dolby Surround : Select this to enjoy multi-channel surround audio
by connecting an amplifier compatible with Dolby Surround.
Stereo : Normally select this.
D. (Dynamic) Range Compres.
(Compression)
You can enjoy a powerful sound at a low volume level while playing
Dolby Digital software.
Auto : Select to apply the effect to multi-channel encoded software.
On : Select this to always use this function.
Tuner
IF Band Width Auto : Increases the tuner selectivity to reduce interference noises
between adjacent stations. (Stereo effect may be lost.)
Wide : Subject to the interference from adjacent stations, but sound
quality will not be degraded and the stereo effect will remain.
Area Setting US : When using in North/Central/South America. FM/AM intervals are
set to 200 kHz/10 kHz.
Europe : When using in any other areas. FM/AM intervals are set to 50
kHz (100 kHz during auto search)/9 kHz.
South America : When using in South American countries where FM
interval is 100 kHz. AM interval is set to 10 kHz.
SIRIUS ID*
8
Your SIRIUS identification number appears on the monitor.
*
7
Selectable only for “DISC” (disc playback pauses).
*
8
Appears only when SIRIUS Satellite Radio is connected.
EN_KD-AVX11J-f.indb 41EN_KD-AVX11J-f.indb 41 06.12.21 3:29:34 PM06.12.21 3:29:34 PM