Filter
Top Products
17
ENGLISH
3
Select the desired mode—“AUDIO 1,”
“AUDIO 2” or “OFF.”
4
Finish the setting.
Selecting the external
component to use—EXT IN
You can connect the external component to the CD
changer jack on the rear using the Line Input Adaptor
KS-U57 (not supplied).
To use the external component as the playback
source through this unit, you need to select which
component – CD changer or external component –
to use.
When shipped from the factory, CD changer is
selected as the external component.
• LINE IN: To use the external component other
than CD changer.
• CHANGER: To use the CD changer.
Note:
For connecting the Line Input Adaptor KS-U57 and the
external component, refer to the Installation/Connection
Manual (separate volume).
1
Press and hold SEL (select) for more
than 2 seconds.
“CLOCK H,” “CLOCK M,” “SCM LINK,”
“LEVEL,” “B. SKIP” or “EXT IN*” appears on
the display.
* Displayed only when one of
the following sources is
selected — FM, AM and
Tape.
2
Select “EXT IN” if not shown on the
display.
3
Select the desired mode—“LINE IN” or
“CHANGER.”
4
Finish the setting.
SEL
4
¢
SEL
CLOCK H CLOCK M
LEVEL
SCM LINK
EXT IN
B. SKIP
LINE IN CHANGER
AUDIO2AUDIO1
OFF
SEL
EN15-18KS-FX711/KS-FX511[U]f 3/1/02, 9:5317