JVC GET0074-001A Car Stereo System User Manual


 
23
ENGLISH
Indication For: Preset values
BAS TRE LOUD
USER (Flat sound) 00 00 OFF
ROCK Rock or +03 +01 ON
disco music
CLASSIC Classical +01 –02 OFF
music
POPS Light music +04 +01 OFF
HIP HOP Funk or Rap +02 00 ON
music
JAZZ Jazz music +02 +03 OFF
Selecting preset sound modes
(C-EQ: custom equalizer)
You can select a preset sound mode
(C-EQ: custom equalizer) suitable to the music
genre.
There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step 1 again.
1
Press MODE (M).
“MODE” appears on the upper
part of the display, and the
number buttons work as
different function buttons.
2
Press EQ (equalizer) while “MODE” is
still on the display.
The last selected sound mode
is recalled and applied to the
current source.
3
Select the sound mode you want.
Each time you press the button,
the sound modes change as
follows:
JAZZ POPS
USER ROCK CLASSIC
HIP HOP
Note:
You can adjust each sound mode to your preference,
and store it in memory.
If you want to adjust and store your original sound
mode, see “Storing your own sound adjustments” on
page 24.
To store a sound mode separately for
each playback source (C-EQ Link)
You can select a sound mode and store it in
memory. It will be recalled every time you select
the same source and will be shown on the display.
A sound mode can be stored for each of the
following sources — FM1, FM2, FM3, AM, tape
and external components.
See also “Changing the general settings (PSM)”
on pages 25 and 26.
1 Press and hold SEL (select) for more than 2
seconds so that one of the PSM items
appears on the display.
2 Press ¢ or 4 to select “CEQ LINK
(custom equalizer link).”
3 Turn the control dial clockwise to select “LINK
ON.”
4 Press SEL (select) to finish the setting.
To cancel C-EQ Link, repeat the same
procedure and select “LINK OFF” in step 3.
Note:
When the “CEQ LINK” setting is changed, the sound
mode (C-EQ) is automatically reset to “USER.”
CONTINUED ON THE NEXT PAGE
Ex.: If you have selected “USER” previously
Ex.: When you select “ROCK”
Sound mode indicator flashes.
Sound mode indicator flashes.
EN22-24KS-LH6R_LH4R[E]f.pm5 1/29/02, 9:55 AM23