Filter
Top Products
21
ENGLISH
RPT indicator
Track number of the
currently playing track
To play back tracks repeatedly (Repeat Play)
You can play back the current track repeatedly.
1 Press MODE to enter the functions
mode while playing a disc.
“MODE” appears on the lower part
of the display, and the number
buttons work as different function
buttons.
2 Press RPT (repeat), while
“MODE” is still on the display, so
that the RPT indicator lights up on
the display.
Then, each time you press RPT
(repeat), the repeat play mode
turns on and off alternately.
When the repeat mode is turned on, the RPT
indicator lights up on the display.
Prohibiting CD ejection
You can prohibit CD ejection and can lock a disc
in the loading slot.
While pressing CD CD-CH (AUX), press
and hold
for more than 2
seconds.
“NO EJECT” flashes on the display for about 5
seconds, and the disc is locked and cannot be
ejected.
To cancel the prohibition and unlock the disc,
press again for more than 2 seconds,
while pressing CD CD-CH (AUX).
“EJECT OK” flashes on the display for about 5
seconds, and the disc is unlocked.
Playing a CD Text
In a CD Text, some information about the disc
(its disc title, performer and track title) is
recorded. You can show these disc information
on the display.
Select text display mode while playing a
CD Text.
Each time you press the button, the display
changes as follows:
Notes:
• The display shows up to 8 characters at one time
and scrolls if there are more than 8 characters.
See also “To select the scroll mode – SCROLL” on
page 28.
Some characters or symbols will not be shown (and
be blanked) on the display.
(Ex. “ABCå!d#” ]“ABCA D ”)
• When you press DISP (display) while playing a
conventional CD, “NO NAME” appears for the disc
title/performer and the track title.
Disc Title / Performer
Track Title
Current track no. and
Elapsed playing time
EN19-21KD-SX927R[EE]f.pm5 14/02/2002, 10:16 AM21