Filter
Top Products
ENGLISH
32
EXTERNAL COMPONENT OPERATIONS
KD-SX927R
Portable MD player, etc.
AUX input
• If “LINE IN” does not appear on the display, see
page 28 and select the external input (“LINE IN”).
• Displayed only when one of the following
sources is selected – FM, AM and CD.
To select “AUX IN” (component connected to
the AUX jack on the control panel), press and
hold CD CD-CH (AUX).
2
Turn on the connected component
and start playing the source.
3
Adjust the volume.
4
Adjust the sound characteristics
you want. (See pages 22 – 24.)
Note on One-Touch Operation:
When you press CD CD-CH (AUX), the power
automatically comes on. You do not have to press
to turn on the power.
Playing an external component
You can connect two external components to this
unit.
Connect one to the CD changer jack on the rear
using the Line Input Adaptor KS-U57 (not supplied),
and the other to the AUX (auxiliary) input jack on
the control panel.
Preparations:
• For connecting the Line Input Adaptor KS-U57 and
the external component, refer to the Installation/
Connection Manual (separate volume).
• Before operating the external component using the
following procedure, select the external input
correctly. (See “To select the external component to
use – EXT IN” on page 28.)
• If the input level of the external component
connected to the AUX jack is not high enough,
increase the input level properly. (See “To adjust
the auxiliary input level – AUX ADJ” on page 28.)
1
Select the external component (LINE
IN or AUX IN).
To select “LINE IN” (component
connected to the CD changer jack on
the rear), press CD CD-CH (AUX)
repeatedly.
CD
LINE IN
EN32-32KD-SX927R[EE]f.pm5 14/02/2002, 10:19 AM32