JVC GET0139-001A Car Stereo System User Manual


 
13
ENGLISH
TAPE OPERATIONS
Listening to a cassette
You can play back type I (normal) tapes.
1
Open the control panel.
Note on One-Touch Operation:
When a cassette is already in the cassette
compartment, pressing TAPE (CD-CH) turns on
the unit and starts tape play automatically.
2
Insert a cassette into the cassette
compartment.
The unit turns on and
tape play starts
automatically.
3
Close the control panel by hand.
4
Select the tape direction.
Each time you press 23,
the tape direction alternates
between forward
( ) and reverse
( ).
To stop play and eject the cassette
Press 0.
Tape play stops, the control panel flips down. The
cassette automatically ejects from the cassette
compartment. The source changes to the
previously selected one.
If you change the source, tape play also stops
(without ejecting the cassette this time).
You can also eject the cassette by pressing 0
while the unit is turned off.
To fast-forward and rewind a tape
To stop fast-forward and rewind at any
position on the tape, press 23.
Tape play starts from that position on the tape.
Notes:
When one side of the tape reaches its end during
play, the other side of the tape automatically starts
playing. (Auto Reverse)
When the tape reaches its end while fast-
forwarding, the tape direction will be changed
automatically.
Press and hold ¢ for
more than one second to
fast-forward the tape.
When the tape reaches its
end, the tape is reversed
and playback starts from the
beginning of the other side.
Press and hold 4 for more than one
second to rewind the tape.
When the tape reaches its end, playback of the
same side starts.
EN13-15_KS-FX771[U]f.p65 2/20/03, 9:01 AM13