JVC GET0139-001A Car Stereo System User Manual


 
19
ENGLISH
To select the level meter—LEVEL
You can select the level meter display according
to your preference.
When shipped from the factory, “AUDIO 2” is
selected.
AUDIO 1: Shows the audio level indicator.
AUDIO 2: Alternates “AUDIO 1” setting and
illumination display.
OFF: Erases the audio level indicator.
To select the external component to use
EXT IN
You can connect the external component to the
CD changer jack on the rear using the Line Input
Adapter KS-U57 (not supplied).
To use the external component as the playback
source through this unit, you need to select
which component—CD changer or external
component—to use.
When shipped from the factory, CD changer is
selected as the external component.
CHANGER: To use the CD changer.
LINE IN: To use the external component
other than CD changer.
Note:
For connecting the Line Input Adapter KS-U57 and
the external component, refer to the Installation/
Connection Manual (separate volume).
Preferred Setting Mode (PSM) items
For detailed operations of each PSM items, refer to the pages listed in the table.
Indications Selectable values/items
Factory-preset See
settings page
CLOCK H Hour adjustment
CLOCK M Minute adjustment
LEVEL Level meter
B.SKIP Blank skip
EXT IN* External component
1 – 12
00 – 59
1 (1:00)
8
OFF
ON OFF 14
AUDIO 1 AUDIO 2
OFF
CHANGER
LINE IN CHANGER 19
AUDIO 2 19
* Displayed only when one of the following sources is selected—FM, AM, and TAPE.
00 (1:00)
EN18-20_KS-FX771[U]f.p65 3/11/03, 10:36 AM19